A solvent-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available.
Substrate
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard, and also most applications in general DIY and automotive (always check on a small test area to check suitability).
Application
Spray at least 25cm from the substrate and spray with an even back and fourth action
Drying Time
Touch dry in approximately 25 minutes, Re-apply after 25-30 minutes
Coverage
Dependent on application and thickness of coats
How to Clean
Product is permanent once dry
Safety Information
DANGER | EN | Humbrol Acrylic Hobby Spray | Contains acetone | Flammable liquid and vapour. Causes serious eye irritation May cause drowsiness or dizziness. Pressurised container: May burst if heated Repeated exposure may cause skin dryness or cracking. Keep out of reach of children. Avoid breathing vapours/spray. Use only outdoors or in a well ventilated area | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attentionIF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. | Protect from sunlight. Do not expose to temperatures exceeding 50o C/122oF. Dispose of contents/container in accordance with local regulations. Read label before use.
